Polishing

We have extensive knowledge and a wide range of cutting compounds and polishes, our highly experienced staff are able to recover almost any condition of gel.

Full Cut & Polish

For this process, we use a combination of cutting pastes and high quality wax polishes applied by machine and hand. The last coat of polish is a radiant wax to ensure protection and a deep glossy shine.  We always include a standard exterior valet when carrying out this a mild cut and polish.

Polish

Our polishing service can be applied to the superstructure and or the hull.  For this process we use a combination of suitable wax polishes applied by machine and hand. The last coat of polish applied by handis a radiant wax to ensure protection and a deep glossy shine. We are able to polish the hull by hand without the cost of a lift out!

A Glaze Application

 A Glaze adds a superior level of protection to your boat by resisting UV damage and the effects of acid rain

• Initial hot soapy shampoo "pre-wash" to remove surface dirt.
• Initial preparation to all gel surfaces using marine grade cutting compounds applied by machine and hand to bring the gel coat back to a deep gloss finish.
• Application of the A Glaze Pink Prep Material. This is applied both by hand and machine and acts as a final fine liquid cutting paste to clean up and ensure the gel is in perfect condition, ready to accept the A Glaze.
• Application of A Glaze - A minimum of 2 coats of glaze will be applied to the gel coat.

When carrying out the A Glaze service to boats we always include our standard exterior valet to ensure the rest of the exterior of the craft is cleaned and shown in it's best light. During the preparation period (cutting back) mess is made so the exterior valet ensures your boat is left in perfect condition.